Warning: session_save_path(): open_basedir restriction in effect. File(/home/users/web/b1260/dot.ricmontoya/cgi-bin/tmp) is not within the allowed path(s): (D:/InetPub/vhosts/dot.ricmontoya\;C:\Windows\Temp\) in D:\InetPub\vhosts\dot.ricmontoya\httpdocs\technical_entry.php on line 2

Warning: session_start(): Session cannot be started after headers have already been sent in D:\InetPub\vhosts\dot.ricmontoya\httpdocs\technical_entry.php on line 3

Warning: session_save_path(): Session save path cannot be changed after headers have already been sent in D:\InetPub\vhosts\dot.ricmontoya\httpdocs\blogheader.html on line 4

Warning: session_start(): Session cannot be started after headers have already been sent in D:\InetPub\vhosts\dot.ricmontoya\httpdocs\blogheader.html on line 5
Yamato Carburetor Float

Yamato Carburetor Float

Author: Ric

Jan 15, 2010

Yamato float settings, measurement is from the top of the float pin to the top of the float. Model 80 is 1", Model 101, 102, 202 & 302 is 1 1/4".

If you have fuel dripping from the venturi of the carburetor (especially when the bow of the boat is lower than the transom) try lower the float a 1/16", but no more than 1/8"

If you still have fuel leaking check the integrity of the float pin and float seat for debris of worn parts.